| 1.00 |
Jun 2, 2003 |
1) CAT-250 released to production.
|
 1.01 |
Aug 1, 2003 |
1) With Zone 1 Channel 4 ON and during a CW identification,
a key of COR during the CW
was causing the repeater to hang.
2) The controller's identification function was re-written to
fix incorrect placement
of ID#1 (Inactive ID) and ID#2 (Active ID). |
| 1.01A |
Sep 1, 2003 |
1) Activated macro pointers 41XX-46XX to facilitate
the pulse tuning of various radio's.
2) Fixed Time-Of-Day zone control channel which
did not disable the time-of-day request.
3) DTMF un-mute command (#) was not resetting after a command
was entered.
4) DTMF muting not working properly on port #2.
5) Macro pointer 6XXX (controlling UF outputs) no longer change
the zone 5 contents. Nor do these macro pointers update the EE
PROM contents. |
| 1.01B |
Sep 3, 2003 |
1) Voice ID switch-to-CW was causing the PTT
to remain on has been fixed.
2) Added a new Echolink® control channel Zone 7 Channel 3.
When on and port #1 DTMF muting is on, DTMF entries will only be
muted out port #1. Port #2 will pass DTMF tones for node controlling.
|
| 1.01C |
Sep 20, 2003 |
1)
Reading back macro codes, while in the programming mode, was voicing the word "Ten" instead
of word "Zero". .
2) Turn-On-Delay reset is now controlled by the DTMF Access
Sleep timer. |
| 1.01D |
Oct 15, 2003 |
1) When in the remote base mode and the fan zone
control active, link PTT was not operating correctly. |
| 1.01E |
Dec 11, 2003 |
1) During Port #2
time-out, Fan timer was being cleared.
2) Other minor correction and enhancements. |
| 1.01F |
Feb 5, 2004 |
1) New command pointers added for DTMF access
On/Off (7100=Off, 7101=On).
2) Packet boundary on some large
macro commands were buffering -1 when populated by the ED-250W
configuration editor. |
| 1.01G |
Feb 24, 2004 |
1) Fixed
forced ID problem that was suppressing the link audio (Reported via CAT-250 FORUM posting).
|
| 1.01H |
Mar 27, 2004 |
1) Fixed programming of event macro 50 (Power-on)
and user macro 40 via DTMF. Read and Erase OK but not accepting
Programming commands.
|
| 1.02 |
Oct 19, 2004 |
1) Fixed forced DTMF entry channel from
aborting other entries.
2) Removed internal audio OFF command after playing a
voice message from within a macro.
3) Fixed CTCSS encoder switching during CW. |
| 1.02A |
May 18, 2005 |
1) Fixed COR #2 switching ID to CW problem.
|
| 1.03 |
Apr 26, 2008 |
1) Fixed CW ID not being able to program one character.
2) Fixed stuck PTT with a empty CW ID and keying up on a voice ID programmed to switch to CW. |
Print
Layout 
