VHF Repeater and Link system

[W5KGT]

The 147.135 repeater has a CAT-1000b with a DVR board and a RLS-1000.
It has two UHF link radios, one points west to a UHF hub repeater and the other points east to the 145.35 that is in the CAT-700 macro exchange forum.
Here are some macros and schedular strings that I use.

Macro 1 DTMF=146940
*14 01 146940 * 6401 4002 6400 3031
6401 = PTT #2 control on
4002 = send DTMF tones (Generator location 2) 1 4 6 9 4 0
6400 = PTT #2 control off
3031 = plays message 24 (This repeater is not connected 2 the 1 40 6
point 9 4 repeater)

Macro 2 DTMF=9854
*14 02 9854 * 1650 3029 1651
1650 = turns off zone 6 channel 5 (transceiver voice)
3029 = plays message 29 (east side link not connected)
1651 = turns on zone 6 channel 5

Macro 3 DTMF=9855
*14 03 9855 * 1650 3030 1651
1650 = turns off zone 6 channel 5 (transceiver voice)
3030 = plays message 30 (west side link not connected)
1651 = turns on zone 6 channel 5

Macro 4 DTMF = 881
*14 04 881 * 3025 5208 7001 7004
3025 = plays message 25 (east and west link system connected please identify)
5208 = load memory file 8
7001 = link control on
7004 = link bridge up

Macro 5 DTMF = 146941
*14 05 146941 * 5206 6001 6401 4001 6400 3031
5206 = load memory file 6
6001 = time delay 1 sec.
6401 = PTT #2 control on
4001 = send DTMF tones first slot (14691)
6400 = PTT #2 control off
3031 = plays message 31 (This repeater is now connected the the 1 40 6 point 9 4 machine
to the east)

Macro 6 DTMF = 871
*14 06 871 * 3023 5207 7001 7004
3023 = plays message 23 (west side link connected please Identify)
5207 = load memory file 7
7001 = link control on
7004 = link bridge up

Macro 7 DTMF = 861
*14 07 861 * 3024 5206 7001 7004
3024 = plays message 24 (east side link connected please Identify)
5207 = load memory file 7
7001 = link control on
7004 = link bridge up

Macro 8 DTMF = 851
*14 08 851 * 3009 5205 7001 7004
3009 = plays message 9 (This repeater is not connected to link system)
5205 = load memory file 5
7001 = link control on
7004 = link bridge up

Macro 9 DTMF = 1286
*14 09 1286 * 1351 4428
1351 = Turns on zone 3 channel 5 (drop out message 1) DVR "Skywarn is activated"
4428 = copy voice message 28 to message 11 (courtesy tone)

Macro 10 DTMF = 12860
*14 10 12860 * 1350 4409
1350 = Turns off zone 3 channel 5
4409 = copy voice message 09 to message 11 (courtesy tone)

Be back to finish schedular later.