A  word vocabulary carefully selected
for amateur repeater operation is available to construct  different
voice messages. Each message can be  words in length. Configure
your repeater ID and announcements to suit your particular needs. Chimes,
sound effects and female salutations are also included.
DTMF Key-Pad Test
The key-pad test will read back the numbers
decoded in a synthesized voice. This includes the words "STAR" and "POUND".
Memory space is provided for  custom
courtesy tones. Each tone can consist of up to three different tone
frequencies of various lengths and separations .
The CAT-300DX switches to CW when a user
talks over the voice ID.
A full feature autopatch with storage for
 speed dial numbers highlights the CAT-300DX. Each speed dial location
accepts  digit numbers and includes space for call letters. The same
is true for the  Emergency speed dial locations. Regular calls are
preceded by a phone number read-back. This feature can be suppressed
by a mic key-click. Long distance protection is provided by a first number
0-1 check. An autopatch time extender command rounds out the features.
In addition to the Reverse autopatch, full telephone control and programming
provides extra security .
Three remote switches control equipment at
your repeater site. DTMF commands are available to turn OFF, ON or
Momentarily change state, any time you choose.
An extensive set of programming commands
permits you to customize your repeater's operation. Protection is provided
by a user programmable  digit un-lock number. Once un-locked, use
the programming commands to load voice messages, speed dial numbers,
change prefix codes and timer settings.
User Function Inputs
Two inputs activated by a positive voltage
from other equipment at the repeater site, causes the CAT-300DX to execute
any repeater command. External repeater control or information about
the repeater site will be instantly available.
Repeater Control Channels
The CAT-300DX has 64 remote control channels.
Divided into groups of eight, according to their function, they can
be manually controlled through the repeater or telephone .
Remote Base COR - PTT Logic
When enabled, user function switch #3 is converted
to a transceiver PTT while Logic input #1 is converted to a transceiver
COR. Both receiver audios must be gated and share the same receiver audio
input. User output #1 controls the relay to disconnect the remote base
receiver when not in use. Or use the optional RLS-1000B Remote
Base Switch board to control the repeater and two remote base transceivers.